Description
The Mesh Tattoo Ink Holder System.
The Mesh Tattoo Ink Holder System includes a 16.5″ wide x 11.5″ tall metal board which can be mounted on a wall using holes at the back, or attached to any surface with double-sided tape. It also includes a kickstand to prop the board at a 70-degree angle on your work station.
The system comes with 30 magnetic bottle holders. These can hold your ink bottles either vertically or horizontally, and are most effective with 1-oz bottles (1″ wide) and 2-oz bottles (1.25″ wide).
The holders can accommodate 1/2-oz bottles perfectly, although these may sit slightly lower in the holder. It is also possible to use the holders for 4-oz bottles (1.5″ wide), but these can only be mounted vertically as they would be too heavy for horizontal placement.
Mesh Set Includes:
Mesh Metal Board (16.5″ Inches wide x 11.5″ Inches tall)
– Can be mounted to a wall with pre-drilled holes.
– Can be used with double-sided tape.
– Use the kickstand to prop the board at a 70-degree angle on your work station.
Magnetic Bottle Holder That Holds 30 Tattoo Inks
– Hold your ink bottles either vertically or horizontally.
– Works best with 1-oz (1″ wide) & 2-oz bottle (1.25″ wide).
– Will fit 1/2-oz perfectly but may sit shorter in the holder.
– Will also fit 4-oz (1.5″ wide) bottles, but can only be mounted vertically.